Slide Mounting Media
Electron Microscopy Sciences Low viscosity embedding media kit, 1 kit
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam. Kit consists of: 450 ml NSA, 225 ml ERL 4221 , 225 ml DER 736 , 25 ml DMAE.
Electron Microscopy Sciences SEM Low Voltage Resolution Specimen Gold on Carbon, Hitachi Stub
Larger gold particles in this test allow for a higher contrast and smaller gaps allow resolution to be measured. This helps to make the test easier to use when operating conditions are not optimal.
Type: Hitachi Stub
Polysciences, Inc. Aqua-Poly/Mount, 5 x 20 mL
Aqua-Poly/Mount is a water-soluble, non-fluorescing, non-permanent, aqueous mounting medium formulated for mounting sections directly from aqueous solutions. It is useful for immunofluorescent techniques as it enhances and retains fluorescent stains.
Enzo Life Sciences Antifade mounting medium (hardset) (10ml)
Antifade mounting medium (hardset) is an antifade reagent that causes little or no quenching. Use of the mounting medium significantly extends the photobleaching half-life of the fluorescent stain. Long Term Storage: -80°C. Applications: IF, IHC, Fluorescence microscopy, Fluorescent detection .
Cayman Chemical AOCS MedIM nd LNgchaIn F 50mg
A mixture of medium- and long-chain fatty acid methyl esters; contains seven saturated and mono- and poly-unsaturated fatty acid methyl esters; intended for use as a reference standard for the detection of fatty acids in coconut, palm kernel, babassu, and ouri-ouri oils, among others, by GC-MS; supplied in an amber ampule in which the headspace has been purged with nitrogen/argon to prevent lipid oxidation
Electron Microscopy Sciences Technovit 7100 Histo Set
Foils, 100 pieces Histobloc, Histoform S or Q Embedding Mold, 100 piece Histoknife H, microtome knife holder, 17 or 22 cm, Technovit 3040, 100g powder and 80 ml liquid.
Vector Laboratories VECTASHIELD PLUS Antifade Mounting Medium, 2ml
VECTASHIELD PLUS Antifade Mounting Medium is a unique, stable formula for preserving fluorescence. This medium inhibits rapid photobleaching of fluorescent proteins and fluorescent dyes. Features: No inherent toning or background - Superior signal retention across the spectrum from blue to far red - Mounted sections can be viewed in 1 hour - Available in two convenient sizes - Superior non-setting formulation -
Abcam Limonene Mounting Medium, 30ML
Limonene Mounting Medium ab104141 is an organic mounting medium compatible with chromogens such as DAB.
The product is subject to the following: Abcam Restricted Use Statement
ABBERIOR INSTRUMENTS AMERICA LLC MOUNT SOLID ANTIFADE
abberior MOUNT SOLID ANTIFADE is an aqueous mounting medium designed for confocal and superresolution microscopy. The refractive index (before hardening) is identical to that of many biological samples (n=1.38). Specimen mounting using abberior MOUNT SOLID ANTIFADE is convenient since no dilution series is required. After specimen mounting, the embedding medium is hardening. So sealing of the mounted specimen with nail polish or similar is not required. abberior MOUNT SOLID ANTIFADE prevents photobleaching and preserves the signal of fluorescent labels. For scientific use only. Must not be used for diagnostic or medical purposes.
Hach Company Sanitary Mounting Kit, 3700 Series and pHD Sensors
316 Stainless Steel Sanitary 2-Inch Tee and Heavy Duty Clamp. For use with the sanitary style 3700-series inductive/electrodeless conductivity sensors.
Electron Microscopy Sciences Quetol 651/NSA Embedding Kit
A water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks. Kit consists of: 225 ml Quetol 651, 450 ml NMA , 450 ml NSA, 50 ml
Electron Microscopy Sciences Citifluor™ Mountant Solution MWL4-88, Glycerol Based, Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Mountant solution based on Mowiol 4-88, glycerol, water and tris-amine buffer.
Material: Glycerol Based
Type: Hardening